Gauge numbers run backwards (a bigger number is thinner) and they are not the same for every material. These are the numbers for carbon steel.
Steel sheet (Manufacturers' Standard Gauge)
| Gauge | Inches | Closest fraction | lb / sq ft |
|---|---|---|---|
| 7 | 0.1793 | 3/16" | 7.50 |
| 8 | 0.1644 | 11/64" | 6.88 |
| 10 | 0.1345 | 9/64" | 5.63 |
| 11 | 0.1196 | 1/8" | 5.00 |
| 12 | 0.1046 | 7/64" | 4.38 |
| 14 | 0.0747 | 5/64" | 3.13 |
| 16 | 0.0598 | 1/16" | 2.50 |
| 18 | 0.0478 | 3/64" | 2.00 |
| 20 | 0.0359 | 1/32" | 1.50 |
Tube wall gauges are different
Mechanical and structural tube walls are usually called out by a slightly different gauge table (Birmingham wire gauge): 16 ga = 0.065", 14 ga = 0.083", 11 ga = 0.120". So 11 ga tube (0.120") is a little thicker than 11 ga sheet (0.1196") and 14 ga tube (0.083") is thicker than 14 ga sheet (0.0747").
Above about 3/16" (7 gauge), steel is called out by fractional thickness and sold as plate.
See weights for every thickness in the sheet weight chart and the plate weight chart, and tube wall weights in the square tube chart.
Frequently asked questions
How thick is 11 gauge steel?
11 gauge sheet steel is 0.1196 inch, about 1/8 inch. 11 gauge tube wall is 0.120 inch.
How much does 14 gauge steel weigh?
14 gauge sheet steel (0.0747 inch) weighs about 3.13 lb per square foot.