Square and rectangular tube is the workhorse of miscellaneous metals. Here is how common sizes are typically used. This is general shop guidance: anything structural, life-safety or code-governed (guards, handrails, stairs, platforms) should follow the drawings, the engineer and your local code.
Light gauge: 16 and 14 ga (0.065" and 0.083")
Pickets, infill, light frames, furniture, shelving and signage. Easy to cut and bend, but burns through easily and is too light for posts or anything that takes a hit. 1" 14 ga square tube is about 1.0 lb/ft.
11 ga and 1/8" (0.120" and 0.125")
The everyday wall for gate frames, rails, carts, equipment frames and enclosures. Welds easily with MIG and holds up to normal handling. 2x2 11 ga is about 2.9 lb/ft.
3/16" and 1/4"
Posts, columns, heavy gate frames, bollard sleeves, structural frames and anything bolted to concrete. 2x2x3/16 is 4.32 lb/ft; 4x4x1/4 is 12.2 lb/ft.
Tips
- Match the wall to the welding you can do. Thin wall on heavy plate is hard to weld well.
- Look at weight before you commit to a heavier wall on a big job. It adds cost twice: the steel and the freight or galvanizing.
- Rectangular tube is far stiffer in the tall direction. A 3x2 standing on the 3" face beats a 2x2 of the same wall for a little more weight.
Look up any size in the square tube weight chart and the rectangular tube weight chart.
Frequently asked questions
What wall thickness is 11 gauge square tube?
0.120 inch. It is slightly lighter than 1/8 inch (0.125) wall.
How much does 2x2x3/16 square tube weigh?
4.32 lb per foot, or about 86 lb for a 20 ft stick.