A fabrication quote has two parts that should be priced differently: what you buy, and the time you spend. Mixing them is the most common reason a busy shop still struggles to make money.
The structure
Quote = COGS + (COGS × markup %) + (labor rate × hours)
- COGS (cost of goods) is everything you buy for the job: steel, parts, hardware, paint or powder coat, galvanizing, outside services like laser cutting or bending, delivery.
- Markup is applied to COGS. It covers the cost of ordering, handling, drops you can't reuse, and your risk on price changes.
- Labor is your shop rate times estimated hours. It is not marked up, because your shop rate already includes overhead and profit on top of what the hours cost you.
Markup is not margin
Markup is a percentage of cost. Margin is a percentage of the selling price. A 25% markup on $1,000 of material sells for $1,250. Your $250 is 25% of cost but only 20% of the price.
| Markup on cost | Margin on price |
|---|---|
| 10% | 9.1% |
| 15% | 13.0% |
| 20% | 16.7% |
| 25% | 20.0% |
| 30% | 23.1% |
| 40% | 28.6% |
| 50% | 33.3% |
| 100% | 50.0% |
Margin = markup ÷ (1 + markup). If you want a 20% margin on materials, you need a 25% markup.
A worked example
A pair of dumpster enclosure gates: $1,485.50 in tube, plate, hinges, cane bolts and powder coat. 25% markup. 22 hours of shop time at $85 an hour.
- Materials and components: $1,485.50 + $371.38 = $1,856.88
- Labor: 22 × $85 = $1,870.00
- Quote: $3,726.88
Run your own numbers in the free quote builder. If you want every material, part and vendor line itemized and saved, plus branded PDF quotes with your logo, that is what Quote Builder Pro does.
Where shops lose money on quotes
- Pricing material from memory instead of a current price per foot or per pound.
- Forgetting finish, galvanizing turnaround, freight and consumables.
- Quoting hours for the welding and forgetting layout, handling, grinding, loading and install.
- Ordering by total feet instead of by sticks. Nest the cut list first with the cut list optimizer so you price the sticks you will actually buy.
Frequently asked questions
Should I mark up labor on a fabrication quote?
Not if your labor rate is a true shop rate. A shop rate already includes overhead and profit on top of wages, so marking it up again double counts.
What is a 25% markup as a margin?
20%. Margin = markup / (1 + markup) = 0.25 / 1.25 = 0.20.